12cavity Hot Runner Air Seal Pet Preform Plastic Injection Mould

12cavity Hot Runner Air Seal Pet Preform Plastic Injection Mould
Product Details
All of our 12 cavity jar, environmental preform mould, 16 Cavities jar Preform Mould has reached the premium standard, with well-designed craftsmanship and stable performance. Due to our dedication, our products are well known throughout the world and our export volume continuously grows every year. We give full play to the strengths and advantages of enterprises, constantly improve various management systems and improve the technical level and overall quality of employees. It is our mission to constantly develop and enrich our subjective world to serve the people, because this world has given everyone the right to survive and develop. We are willing to create a better tomorrow hand in hand with the vast number of users.

Chapter 3. Cautions for using

3.1 When installing a new mold,it must be confirmed that the bolts are loosened due to transportation, and all the necessary if necessary bolt.

3.2 After the mold temperature control system is installed,it must be confirmed whether the socket and the assembly line are correctly connected according to the identification,In order to avoid causing electrical parts burning or abnormal temperature control and other problems occurred.

3.3 When the mold does not open the cooling water, do not heat,high temperature may cause damage and deformation of the mold parts and seals.

3.4 The socket above the mold and the heater inside the mold are forbidden to contact with water,otherwise the heater and the temperature control box parts will be damaged.

3.5 When there is no instant injection after the clamping thimble is opened,and the mold is locked again,check whether there is glue overflow in the cavity to avoid clogging or crushing the core and cavity.

3.6 Guide column,guide sleeve and demoulding mechanism should use high viscosity solid oil, and should maintain good lubrication for a long time,otherwise it will lead to parts wear or ejection,and the return is not smooth.

3.7 When the mold is warmed, first open the main channel temperature, until the temperature of the main channel rises to the set value, then the shunt switch can be put on, so as to avoid the decomposition of the raw material and the blackening of the raw material.

3.8 The mold must be inspected or maintained on a daily maintenance basis. In order to avoid loose screws in the key parts of the mold.

Contact:Young yang
Mobile/Whatsapp: 0086 18267666869
E-mail: sales03@tzyuno.com
        18267666869@163.com

Yuno Mould is a famous enterprise in offering quality 32 cavities oil /water pet preform mold made in China, which is also one of the leading manufacturers and suppliers of PET perform moulds. We have introduced advanced equipment and technology into our factory in order to offer customers quality mould with unique design. And customized service is also offered.
Our company exerts the potential of high-tech process of imported equipment and takes the research and development and production and sales route of high-tech 12cavity Hot Runner Air Seal Pet Preform Plastic Injection Mould with the enthusiasm of scientific management. We are ready to face the worries and make the improve to understand all the possibilities in international trade. Our company has a group of professional technical personnel and high-quality marketing personnel, can provide a series of services such as consulting, planning, after-sales according to the requirements of customers.
Hot Tags: 32 cavities oil /water pet preform mold manufacturers China, suppliers, factory, customized, made in China, preform bottle mold, 96 Cavites Hot runner Preform mould, 18 Cavities Hot runner jar Preform Mould, oil preform mold, design injection mould, preform mould
Feedback

You Might Also Like