16cavity Hot Runner Air Seal Pet Preform Plastic Injection Mould

16cavity Hot Runner Air Seal Pet Preform Plastic Injection Mould
Product Details
We are committed to serving every customer with professionalism, providing customers with continuous and solutions for 96 cavity mould, 16 Cavities Hot runner oil Preform mould, preform bottle mold and bringing endless wealth to customers. In order to ensure customer satisfaction, we use expert-level services, tailor-made for customers, and provide a full range of product solutions. We warmly welcome your patronage and will serve our clients both at home and abroad with products of superior quality and excellent service geared to the trend of further development as always. We take technological innovation as the guide, continuously improve the management level, and further develop the international and domestic markets, so that customers can get high-quality products and services at reasonable prices in a short time.

Chapter 3. Cautions for using

3.1 When installing a new mold,it must be confirmed that the bolts are loosened due to transportation, and all the necessary if necessary bolt.

3.2 After the mold temperature control system is installed,it must be confirmed whether the socket and the assembly line are correctly connected according to the identification,In order to avoid causing electrical parts burning or abnormal temperature control and other problems occurred.

3.3 When the mold does not open the cooling water, do not heat,high temperature may cause damage and deformation of the mold parts and seals.

3.4 The socket above the mold and the heater inside the mold are forbidden to contact with water,otherwise the heater and the temperature control box parts will be damaged.

3.5 When there is no instant injection after the clamping thimble is opened,and the mold is locked again,check whether there is glue overflow in the cavity to avoid clogging or crushing the core and cavity.

3.6 Guide column,guide sleeve and demoulding mechanism should use high viscosity solid oil, and should maintain good lubrication for a long time,otherwise it will lead to parts wear or ejection,and the return is not smooth.

3.7 When the mold is warmed, first open the main channel temperature, until the temperature of the main channel rises to the set value, then the shunt switch can be put on, so as to avoid the decomposition of the raw material and the blackening of the raw material.

3.8 The mold must be inspected or maintained on a daily maintenance basis. In order to avoid loose screws in the key parts of the mold.

Contact:Young yang
Mobile/Whatsapp: 0086 18267666869
E-mail: sales03@tzyuno.com
        18267666869@163.com

Yuno Mould is a famous enterprise in offering quality 32 cavities oil /water pet preform mold made in China, which is also one of the leading manufacturers and suppliers of PET perform moulds. We have introduced advanced equipment and technology into our factory in order to offer customers quality mould with unique design. And customized service is also offered.
Relying on our strong talent advantages, market advantages, capital advantages, technological advantages and innovation advantages, we continue to develop 16cavity Hot Runner Air Seal Pet Preform Plastic Injection Mould to enhance the core competitiveness of the brand and product market share. Our company's advantages include professional design team, mature and experienced construction team, and perfect after-sales service. We will continue to work hand in hand with new and old customers to develop our business vision in the future.
Hot Tags: 32 cavities oil /water pet preform mold manufacturers China, suppliers, factory, customized, made in China, bottle blowing mould, runner, gallon mold, hot runner, 8 Cavities Open Cap Mould, plastic jar mould
Feedback

You Might Also Like