48 Cavity Plastic Injection Needle Velve Pet Preform Mould (YS826)

48 Cavity Plastic Injection Needle Velve Pet Preform Mould (YS826)
Product Details
We are going to continue to lead the pursuit of excellence created a unique and exquisite bottle mould, Water Preform Mould, Open Cap Mould, working together to build a new world with the community. We have all day online sales to make sure the pre-sale and after-sale service in time. We adhere to the development concept of 'What customers want is what we do', and constantly innovate to meet the needs of the evolving market. Our professional and elite team is only to make products and services better and obtain the highest customer satisfaction.

Chapter 2. Installation of Mold

2.1 Installation

A. Install existing coupling bars and mold safety devices onto the mold (figure 1).

B. The mold is first positioned on the injection guide hole of the machine fixed template.

C. Install the ejector rod.

D. Close the mold.

E. After closing the mold, install the bolts of the die and the moving template.

F. Unload the connection bar.

G. Open the mold.

H. Bolt the ejector rod to the die pushing board.

I. Connecting cooling water pipes, air pipes and cables.

J. Check the sealing of water and gas lines.

K. Check the opening and closing performance of the valve needle (must first open the main channel temperature to 200 ~ 250 , gate temperature to 140-1603 minutes later. The cooling water must be opened in advance before the valve needle can be opened.

L. The hot runner shall not be heated when it is not necessary, and the heating must be filled with water.

M. Nozzle temperature special attention, the nozzle heating ring can only be about to start (5 to 10 minutes) before heating, and immediately shut down when the shutdown.

 

2.2 Disassembly / Storage

A. Remove the mold from the machine, cool it to room temperature, and clean it thoroughly to remove all residual plastic.

B. The mold to the surface of the application of clean soft cloth cleaning.

C. Emptying all cooling water and blowing dry with air.

D. Mold storage, need to spray with antirust agent.

Contact:Young yang
TAIZHOU HUANGYAN YUNO MOULD CO.,LTD
Add: No.28 Beicheng zhuling Industry ,Huangyan ,Taizhou City ,Zhejiang Province,China.
Mobile/Whatsapp: 0086 18267666869
E-mail: sales03@tzyuno.com
18267666869@163.com
Tel: 0086 576 84055282

 

 

 

 

Yuno Mould is a famous enterprise in offering quality 48 cavity pet preform mold made in China, which is also one of the leading manufacturers and suppliers of PET perform moulds. We have introduced advanced equipment and technology into our factory in order to offer customers quality mould with unique design. And customized service is also offered.
We will always provide customers with first-class 48 Cavity Plastic Injection Needle Velve Pet Preform Mould (YS826) and services. Our company has built a product research and development center with international standards, which has created good conditions for continuously improving production technology and product quality, and increasing technical reserves. Over the past few years, through the hard work of all staff and the friendly cooperation of brother units, we can accurately grasp the information and opportunities in the market.
Hot Tags: 48 cavity pet preform mold manufacturers China, suppliers, factory, customized, made in China, PET Preform Mould, 32 Cavities Needle valve Preform mould, hot runner, 12 Cavities Theft cover cap Mould, 32Cavities Preform Mould, 32 Cavites Hot runner Preform mould
Feedback

You Might Also Like