Hot Runner Pet Bottle Preform Mould Preform Injection Mould

Hot Runner Pet Bottle Preform Mould Preform Injection Mould
Product Details
We always dedicate ourselves to the quality slogan and have set up a strict, standard and elaborate management system. With rich experience and considerate services, we have been recognized as a reliable Open Cap Mold, high quality mould, 2 cav preform mould supplier for many international buyers. Since establishment in the early 1990s, we have set up our sale network in many countries. Our company adheres to the business philosophy of 'Quality is our life, integrity is our soul, and speed is our unchanging pursuit', we have continuously upgraded the products in recent years to ensure quality and further enhance its market competitiveness. We are going to do our greatest to satisfy or exceed customers' prerequisites with excellent goods, advanced concept, and economical and timely company.

Chapter 3. Cautions for using

3.1 When installing a new mold,it must be confirmed that the bolts are loosened due to transportation, and all the necessary if necessary bolt.

3.2 After the mold temperature control system is installed,it must be confirmed whether the socket and the assembly line are correctly connected according to the identification,In order to avoid causing electrical parts burning or abnormal temperature control and other problems occurred.

3.3 When the mold does not open the cooling water, do not heat,high temperature may cause damage and deformation of the mold parts and seals.

3.4 The socket above the mold and the heater inside the mold are forbidden to contact with water,otherwise the heater and the temperature control box parts will be damaged.

3.5 When there is no instant injection after the clamping thimble is opened,and the mold is locked again,check whether there is glue overflow in the cavity to avoid clogging or crushing the core and cavity.

3.6 Guide column,guide sleeve and demoulding mechanism should use high viscosity solid oil, and should maintain good lubrication for a long time,otherwise it will lead to parts wear or ejection,and the return is not smooth.

3.7 When the mold is warmed, first open the main channel temperature, until the temperature of the main channel rises to the set value, then the shunt switch can be put on, so as to avoid the decomposition of the raw material and the blackening of the raw material.

3.8 The mold must be inspected or maintained on a daily maintenance basis. In order to avoid loose screws in the key parts of the mold.

Contact:Young yang
Mobile/Whatsapp: 0086 18267666869
E-mail: sales03@tzyuno.com
        18267666869@163.com

Yuno Mould is a famous enterprise in offering quality 32 cavities oil /water pet preform mold made in China, which is also one of the leading manufacturers and suppliers of PET perform moulds. We have introduced advanced equipment and technology into our factory in order to offer customers quality mould with unique design. And customized service is also offered.
We will strictly abide by our commitments, be proactive, further increase investment in research and development of Hot Runner Pet Bottle Preform Mould Preform Injection Mould, develop better products to share with users, and sincerely provide quality services to users. In the general trend of consumption upgrade and rational consumption, we are constantly accumulating advanced technology. Through continuous efforts, we have formed a set of perfect technical service system from raw material selection to product after-sales service.
Hot Tags: 32 cavities oil /water pet preform mold manufacturers China, suppliers, factory, customized, made in China, 5gallon preform mould, 8 Cavities Hot Runner Cap Mould, 4 Cav Gallon Preform Mould, 16 Cavities jar Preform Mould, Steel Hot Runner Mould, five gallon preform mould
Feedback

You Might Also Like