Pet Preform Mould with Hot Runner System

Pet Preform Mould with Hot Runner System
Product Details
We are determined to continuously improve and innovate our PCO cap Mold, Cap Mould, 16 Cavities Needle valve Preform mould, insisting on our research and development strength and treating our customers honestly. We take pragmatism, innovation, efficiency and progress as our corporate spirit. While the company continues to develop, we sincerely hope to establish partnerships with customers at home and abroad for mutual benefit and create prosperity together. We promote the enterprise spirit of dedication, integrity, teamwork and innovation. With all those advantages, we are going to create'the reputable international brand of nylon monofilaments', and spreading our products to every corner of the world.

Chapter 3. Cautions for using

3.1 When installing a new mold,it must be confirmed that the bolts are loosened due to transportation, and all the necessary if necessary bolt.

3.2 After the mold temperature control system is installed,it must be confirmed whether the socket and the assembly line are correctly connected according to the identification,In order to avoid causing electrical parts burning or abnormal temperature control and other problems occurred.

3.3 When the mold does not open the cooling water, do not heat,high temperature may cause damage and deformation of the mold parts and seals.

3.4 The socket above the mold and the heater inside the mold are forbidden to contact with water,otherwise the heater and the temperature control box parts will be damaged.

3.5 When there is no instant injection after the clamping thimble is opened,and the mold is locked again,check whether there is glue overflow in the cavity to avoid clogging or crushing the core and cavity.

3.6 Guide column,guide sleeve and demoulding mechanism should use high viscosity solid oil, and should maintain good lubrication for a long time,otherwise it will lead to parts wear or ejection,and the return is not smooth.

3.7 When the mold is warmed, first open the main channel temperature, until the temperature of the main channel rises to the set value, then the shunt switch can be put on, so as to avoid the decomposition of the raw material and the blackening of the raw material.

3.8 The mold must be inspected or maintained on a daily maintenance basis. In order to avoid loose screws in the key parts of the mold.

Contact:Young yang
Mobile/Whatsapp: 0086 18267666869
E-mail: sales03@tzyuno.com
        18267666869@163.com

Yuno Mould is a famous enterprise in offering quality 32 cavities oil /water pet preform mold made in China, which is also one of the leading manufacturers and suppliers of PET perform moulds. We have introduced advanced equipment and technology into our factory in order to offer customers quality mould with unique design. And customized service is also offered.
We are advancing courageously along the road of 'groupization, industrialization, specialization, and internationalization' and continue to contribute to the Pet Preform Mould with Hot Runner System industry all over the world. Our company expresses sincere respect and gratitude for the inquiries from various manufacturers to make continuous efforts to improve, closely cooperate with customer needs, and create a better future! At the same time, we actively absorb advanced technology, use cost advantages, and combine independent innovation to develop a variety of new products.
Hot Tags: 32 cavities oil /water pet preform mold manufacturers China, suppliers, factory, customized, made in China, 18 Cavities jar Preform Mould, designed mould, 96 Cavities Water Preform Mold, 32cavity, 96 Cavities Preform Mould, Jar Preform Mould
Feedback

You Might Also Like