Ready New 20 Cavity 20/410 Self Lock Hot Runner Pet Preform Mould

Ready New 20 Cavity 20/410 Self Lock Hot Runner Pet Preform Mould
Product Details
We always consider the needs of customers as our quest, and try our best to provide wholeheartedly high-quality preform plastic, runner mold, mould for oil bottle and first-rate services to customers at home and abroad to create a brighter future. Inheritance and innovation is an eternal law of our company's development. Since the establishment of our company, we have always insisted on focusing on customer needs and satisfaction, repaying customers with assured products and thoughtful services, and continuously enhancing customer satisfaction.

Chapter 3. Cautions for using

3.1 When installing a new mold,it must be confirmed that the bolts are loosened due to transportation, and all the necessary if necessary bolt.

3.2 After the mold temperature control system is installed,it must be confirmed whether the socket and the assembly line are correctly connected according to the identification,In order to avoid causing electrical parts burning or abnormal temperature control and other problems occurred.

3.3 When the mold does not open the cooling water, do not heat,high temperature may cause damage and deformation of the mold parts and seals.

3.4 The socket above the mold and the heater inside the mold are forbidden to contact with water,otherwise the heater and the temperature control box parts will be damaged.

3.5 When there is no instant injection after the clamping thimble is opened,and the mold is locked again,check whether there is glue overflow in the cavity to avoid clogging or crushing the core and cavity.

3.6 Guide column,guide sleeve and demoulding mechanism should use high viscosity solid oil, and should maintain good lubrication for a long time,otherwise it will lead to parts wear or ejection,and the return is not smooth.

3.7 When the mold is warmed, first open the main channel temperature, until the temperature of the main channel rises to the set value, then the shunt switch can be put on, so as to avoid the decomposition of the raw material and the blackening of the raw material.

3.8 The mold must be inspected or maintained on a daily maintenance basis. In order to avoid loose screws in the key parts of the mold.

Contact:Young yang
Mobile/Whatsapp: 0086 18267666869
E-mail: sales03@tzyuno.com
        18267666869@163.com

Yuno Mould is a famous enterprise in offering quality 32 cavities oil /water pet preform mold made in China, which is also one of the leading manufacturers and suppliers of PET perform moulds. We have introduced advanced equipment and technology into our factory in order to offer customers quality mould with unique design. And customized service is also offered.
We promise to offer all customers with safe, assured and high-quality Ready New 20 Cavity 20/410 Self Lock Hot Runner Pet Preform Mould and services with solid professional knowledge and scientific and effective service concepts. We will always adhere to the correct concept of righteousness and benefit, and build a world-class image of Chinese enterprises as responsible and accountable. After years of research and market experience accumulated by our technical staff, we have gradually transformed into independent research and design, and formed a serialized and diversified product structure.
Hot Tags: 32 cavities oil /water pet preform mold manufacturers China, suppliers, factory, customized, made in China, 6 Cavities oil preform mould, 32Cavities Preform Mould, needle valve, 18 Cavities oil preform mould, 16 Cavities Water Preform Mold, 12 Cavities Needle valve Preform mould
Feedback

You Might Also Like